Skip to Content

Odoo Manufacturing basics: BoMs, work orders and costing

A practical introduction to Odoo MRP for factories in Egypt, Saudi Arabia and the UAE: bills of materials, routings and work centres, manufacturing orders, planning, quality checks, subcontracting and the real cost of every product.
November 7, 2026

Many factories in the region run production on paper job cards and a costing spreadsheet updated once a year. Raw material prices change every month, scrap is never recorded, and nobody knows the real margin on each product until the annual accounts arrive. Odoo Manufacturing connects production to inventory, purchasing and accounting, so materials are consumed, labour is measured and cost is calculated on every order.

FlexCode Middle East is part of FlexCode Systems GmbH, an Odoo Silver Partner. We implement Odoo, so Odoo is the system we describe, next to an honest look at the topic itself.

Key points

  • BoM is the recipe. Components, quantities and operations to make one product.
  • Work centres are capacity. Machines and lines with hours, cost per hour and efficiency.
  • Orders drive the floor. Manufacturing orders reserve materials and create work orders.
  • Cost per order. Actual material, labour and overhead on every finished product.

Bills of materials

A bill of materials lists the components and quantities needed to make a product, and optionally the operations at each work centre. Odoo supports multi-level BoMs, where a semi-finished product has its own BoM, kits that are sold as a set but not manufactured, variants that share one BoM, and by-products such as offcuts that go back into stock.

BoM typeUseExample
ManufactureProduced in your factorySteel cabinet from sheet, hinges and paint
KitSold as a set, picked as componentsGift box of perfumes
SubcontractingMade by a partner from your materialsPrinting or galvanising outsourced
Factory production line with workers
The bill of materials is the recipe every order follows.

Manufacturing orders and the shop floor

A manufacturing order is created manually, from a sales order for make to order products, or from a reordering rule. It reserves components, creates work orders for each operation, and when finished, consumes materials and adds the finished product to stock. On the floor, operators use the Shop Floor app on a tablet to start and stop work orders, follow instructions, record scrap and log quality checks.

  1. Sales order or reorder rule
  2. Manufacturing order
  3. Components reserved
  4. Work orders on tablets
  5. Quality checks
  6. Finished goods in stock

Planning capacity and materials

Work centres define capacity: hours available, number of machines, efficiency and cost per hour. The planning view schedules work orders against that capacity, and the Master Production Schedule lets planners set production targets per week or month while Odoo calculates the materials to buy. Lead times on components and vendors make sure purchases arrive before production starts.

  • Set realistic capacity and efficiency per work centre, not theoretical maximums.
  • Record component lead times so materials arrive on time.
  • Use the Master Production Schedule for products with steady demand.
  • Review late work orders daily in the planning view.

Equipment downtime destroys plans; see Odoo Maintenance for equipment and preventive plans. Raw material buying is covered in purchasing in Odoo.

Product costing

Each finished product is valued at the actual cost of its order: components at their inventory cost, plus work centre time at the cost per hour, plus employee time if tracked. Comparing the actual cost with the BoM standard shows where scrap, slow operations or price increases are eating margin.

Per order

Actual material and labour cost

Multi-level

BoMs for semi-finished goods

Live

Stock of raw and finished goods

Scrap

Recorded with reason and cost

The accounting side is in inventory valuation in Odoo; traceability for batches is in lots, serial numbers and expiry dates. For an industry view, read Odoo for manufacturers in the Middle East.

Quality and compliance

  • Quality control points at receipt, during operations or before shipping.
  • Pass or fail checks, measurements with tolerances, and photos.
  • Quality alerts that block or flag affected stock.
  • Records that support ISO, SFDA, ESMA or SASO audits.

FlexCode implements Odoo Manufacturing

We build your BoMs and routings, set up work centres and costing, put tablets on the shop floor and train planners and operators.

Book a free call

Frequently asked questions

What is a bill of materials in Odoo?

The list of components, quantities and operations needed to make one product.

Can Odoo calculate the real cost of production?

Yes. Each order is costed from actual components, work centre time and labour.

Does Odoo support make to order?

Yes. A sales order can create the manufacturing order automatically.

Can I outsource part of production?

Yes, with subcontracting BoMs and resupply of components to the subcontractor.

Do operators need training?

Briefly. The Shop Floor tablet app is simple: start, stop, record scrap, done.

Talk to us about how Odoo fits your business. Book a free call

Run invoicing, stock and accounts from one system.

FlexCode Middle East implements Odoo in Arabic and English for companies in Egypt, Saudi Arabia and the UAE.